Narrow spaces require slim technology: With a depth of just 8 cm and a generous flush volume of up to 7 litres, the Octa II cistern in the new TECEprofil toilet module is a real problem solver for challenging space conditions in the bathroom and toilet.
TECEprofil toilet module with Octa-II cistern
Slim in front of the wall
All assembly upgrades at a glance
Out of the box, onto the wall: flushing technology from TECE is that simple. Proven features and new details help to make handling even more reliable. No mistakes, no readjustments - discover TECE Octa-II with the handling upgrade.
With a width of 500 mm and a depth of 80 mm, the TECEprofil toilet module with Octa-II cistern is compact and space-saving for any installation situation.
Quickly connected – without sealing
The cistern’s new water connection has a 1/2" outer thread and is compatible with quick adapters.
Assembly made easy
Thanks to the easy fit Quick assembly for Flush plates, you save 60 % working time - and a lot of nerves.
Removed with a "zip"
No sharp knife, no sharp breaking edge: the polystyrene Bare-wall protection in the new TECE Octa II cistern sits in an installation tunnel with a "zip" function. The wall is plastered and tiled right up to the installation tunnel. The Bare-wall protection is then simply removed. The installation tunnel can simply be removed at the required depth with a "zip". Dangerous freehand cuts when shortening with a cutter knife are unnecessary here.
Bathroom design made easy
The TECE cistern Octa II is completely pre-equipped in the TECEprofil Toilet module for use in the TECEprofil pre-wall system. It is easy to install using Corner joints, which are inserted into the slots in the Module frame and connected to the supporting structure.
Connect flexibly
With four-stage fixing, the drain bend can be easily fixed at the required depth. In the two rear positions, the drain bend can also be swivelled to the side for a lateral connection. With a special adapter, a connection can also be installed directly to the rear.
Slim in installation, large in performance
The TECE Octa II cistern is 5 cm slimmer than the TECE Uni cistern and is therefore perfect for installation in a partition wall. With a water volume of 7 litres, it always offers sufficient reserve for immediate rinsing.
Clever solution
Optimum handling: if the drain valve has to be removed in the event of an inspection, it can simply be bent in the upper section - and can therefore be removed from the cistern without difficulty.
Compatible with all flush plates
With TECE Octa-II, you can experience the whole world of TECE flush plates: whether manual, electronic or pneumatics - all TECE flush plates can be used with the new generation of TECE cisterns. Without either or: because thanks to sophisticated technology, the mechanical flush plate can still be fitted even if a remote release is installed.
Image
Installation depth of only 8 cm, ideal for installation in dry walls
Image
Sealed tank, does not need to be opened in the shell construction
Image
Bendable, easily removable drain valve
Image
Easy flush volume adjustment
Image
Throttle set for flushing pressure adjustment
Image
Compatible with all TECE flush plates
Equipped for every installation situation
Special floor plans require particularly special technology. For example, small bathrooms, toilets under low window sills or popular overall designs with countertop washbasins. There are a number of challenges that need to be taken into account when planning cisterns. The TECE range always offers a suitable module. From the universal classic in heights of 1120, 980 and 820 mm to the particularly low 750 mm module and the extra narrow 320 mm toilet module for shaft or corner installation.
Specifications
TECE Octa II cistern
| Description | Specialities | Article number |
|---|---|---|
| TECEprofil toilet module with Octa II-cistern 8 cm, installation height 1120 mm |
Octa- II cistern 8 cm for actuation from the front:
Module frame:
|
9300500 |
Downloads
Can be used in almost any bathroom situation
Retrofit panel for TECE shower toilets
You can’t beat the feeling of being freshly showered. With our TECEone shower toilet, you can experience this freshness every time you go to the toilet. With the new retrofit design cover you can now easily replace your old toilet with the cold water shower toilet TECEone. Almost without dirt and without having to drill or chisel.
Not only a visual eye-catcher
The new retrofit design cover is impressive both visually and functionally: its velvet-matt anti-fingerprint surface made of abrasion- and scratch-resistant high-pressure laminate is not only elegant, it is also extremely easy to clean. The sandwich cover is moisture-resistant.
Possibilities on back of packaging
On the back, the retrofit design panel offers various guide grooves for the water connection of a TECE shower toilet. This means that all technology is hidden behind the elegant surface.
1. Hose guide from shower toilet to cistern
2. Additional guide grooves for different connection points for water or electricity
3. Recess for optional connections such as power supply or supply line via the skirting board
Retrofitted in no time at all
When we developed the retrofit design cover, the focus was not only on the appearance but also on easy assembly. For example, the pressure-resistant sandwich cover weighs only approx. 6.7 kg, making it easy to handle. The cut-out for the flush plate can easily be made with a jigsaw. With a width of 12 mm, the guide grooves for the reinforced hoses are optimally adapted to the TECE fine installation set for shower toilets.
Image
Simple retrofitting of a TECE shower toilet with cold water connection
Image
High-quality and easy-care design surface
Image
Moisture-proof, robust and lightweight material
Image
Fast and simple assembly
Specifications
Retrofit design panel for TECE shower toilets
| Description | Specialities | Article number |
|---|---|---|
| TECE retrofit panel for TECE shower toilets |
|
9700620 |
You can find even more information in our brochure
Downloads
As if from a single mould
TECEloop - the new carrier plate
A bathroom with as few joints as possible and a uniform design is the trend in modern bathroom design these days. The new TECEloop cover support for toilet flush plates helps to fulfil this requirement. The reason is because the surface of the TECEloop cover support can be tiled with customised surfaces.
The cover can be fitted with individual tiles or, for example, with a continuous natural stone slab. Both materials must be cut to size, sanded and glued in place. This is the job of a good tiler. For this purpose, any design actuators in different colours can be combined to create the desired uniform appearance.
The flush-mounted installation frame is available in the colours white, black, bright chrome, gold plated and bright metal. The cover support is suitable for operation from the front as well as from above. This makes the dream of an individual, unique bathroom a reality.
Downloads
Convenient assembly - Easy handling
Uni+Base insert chutes
With two new insertion chutes for the TECE Uni and Base cisterns, installation will be easier for the installer in future and handling will be more convenient for end customers who can insert cleaning tablets via the chute. The reason: The easy fit components for fastening and actuation are now compatible with all TECE flush plates for the new insert chutes. As a result, six assembly instructions have become one - which will be appreciated by the specialist.
Tab in, flap closed, done!
In addition, the easy fit actuation rods are neatly centred when opening and as a result the actuation is fixed. This ensures that everything is in place. A guide sleeve also prevents the flush plate from being pulled too far in front of the wall. Two chute versions are available due to the different depths of the flush plates. Customers with a strong preference for fresh and hygienically cleaned products will find it extremely convenient to insert the cleaning tablets into the system.
Downloads
45°-wall bracket for modules
The new wall brackets with a prefabricated angle of 45° are designed for simple corner assembly. This means that all TECE dry-wall modules can now be quickly and easily attached to a stable wall in angled installation situations. The threaded rods are fitted directly with brackets for supporting the cladding and are attached to the sturdy wall with the enclosed mounting set. TECE corner installation is that simple.
Downloads
