Narrow spaces require slim technology: With a depth of just 8 cm and a generous flush volume of up to 7 litres, the Octa II cistern in the new TECEprofil toilet module is a real problem solver for challenging space conditions in the bathroom and toilet.
TECEprofil toilet module with Octa-II cistern
Slim in front of the wall
All assembly upgrades at a glance
Out of the box, onto the wall: flushing technology from TECE is that simple. Proven features and new details help to make handling even more reliable. No mistakes, no readjustments - discover TECE Octa-II with the handling upgrade.
With a width of 500 mm and a depth of 80 mm, the TECEprofil toilet module with Octa-II cistern is compact and space-saving for any installation situation.
Quickly connected – without sealing
The cistern’s new water connection has a 1/2" outer thread and is compatible with quick adapters.
Assembly made easy
Thanks to the easy fit Quick assembly for Flush plates, you save 60 % working time - and a lot of nerves.
Removed with a "zip"
No sharp knife, no sharp breaking edge: the polystyrene Bare-wall protection in the new TECE Octa II cistern sits in an installation tunnel with a "zip" function. The wall is plastered and tiled right up to the installation tunnel. The Bare-wall protection is then simply removed. The installation tunnel can simply be removed at the required depth with a "zip". Dangerous freehand cuts when shortening with a cutter knife are unnecessary here.
Bathroom design made easy
The TECE cistern Octa II is completely pre-equipped in the TECEprofil Toilet module for use in the TECEprofil pre-wall system. It is easy to install using Corner joints, which are inserted into the slots in the Module frame and connected to the supporting structure.
Connect flexibly
With four-stage fixing, the drain bend can be easily fixed at the required depth. In the two rear positions, the drain bend can also be swivelled to the side for a lateral connection. With a special adapter, a connection can also be installed directly to the rear.
Slim in installation, large in performance
The TECE Octa II cistern is 5 cm slimmer than the TECE Uni cistern and is therefore perfect for installation in a partition wall. With a water volume of 7 litres, it always offers sufficient reserve for immediate rinsing.
Clever solution
Optimum handling: if the drain valve has to be removed in the event of an inspection, it can simply be bent in the upper section - and can therefore be removed from the cistern without difficulty.
Compatible with all flush plates
With TECE Octa-II, you can experience the whole world of TECE flush plates: whether manual, electronic or pneumatics - all TECE flush plates can be used with the new generation of TECE cisterns. Without either or: because thanks to sophisticated technology, the mechanical flush plate can still be fitted even if a remote release is installed.
Image
Installation depth of only 8 cm, ideal for installation in dry walls
Image
Sealed tank, does not need to be opened in the shell construction
Image
Bendable, easily removable drain valve
Image
Easy flush volume adjustment
Image
Throttle set for flushing pressure adjustment
Image
Compatible with all TECE flush plates
Equipped for every installation situation
Special floor plans require particularly special technology. For example, small bathrooms, toilets under low window sills or popular overall designs with countertop washbasins. There are a number of challenges that need to be taken into account when planning cisterns. The TECE range always offers a suitable module. From the universal classic in heights of 1120, 980 and 820 mm to the particularly low 750 mm module and the extra narrow 320 mm toilet module for shaft or corner installation.
Specifications
TECE Octa II cistern
| Description | Specialities | Article number |
|---|---|---|
| TECEprofil toilet module with Octa II-cistern 8 cm, installation height 1120 mm |
Octa- II cistern 8 cm for actuation from the front:
Module frame:
|
9300500 |
Downloads
